Revision 25 as of 2018-03-02 10:07:54

Clear message

Contents

  1. Apple Clients
    1. Push/ Cloud Version
    2. Pull Installation
    3. Push/ Cloud Version using www.print.ethz.ch
    4. Errors
      1. Error 1: Waiting for Authentication

Apple Clients

Push/ Cloud Version

This Instruction describes to print your Document at any Nashuatec Printer located at the ETH (doesn't matter which Building.) Please try to only use the Push /Cloud Version. It creates less Paper waste.

  1. If you select "Follow me", you can specify the queue. Choose "card-ethz" Queue.
  2. Click "Add printer" and wait until the installation has finished.
  3. You will now have a printer for the cloud printing system. You can go to any PIA printer and release your print job(s) using your ETH ID card.

Pull Installation

For Apple Clients which to install the printer on their Mac Device and print direct to the printer (pull Version), please follow this Instruction:

'IMPORTANT': You will need your NETHZ Credentials. If you can not remember your NETHZ Password, try to log on https://password.ethz.ch. If the login worked, then remember them you will need them for the Printer installation.

  1. Download the right Drivers. Please choose by the Operating System Version you are using:
  2. Install it

  3. Open the Program ETH Printers

    • Picture 1

  4. Press the button Update printers list and wait for the refresh to complete.

    • You will be asked for your credentials. Use your NETHZ Account Credentials with the beginning 'd\' Make sure to tick 'Remember this password in my keychain'

      Picture 2

  5. Under Specific printer choose the building where the printer is located. Then all available printers from that building should be shown. Choose the a printer.

    • Picture 3

  6. When you found the printer press Add printer

  7. You will be asked for your Credentials again. At this point only put your NETHZUSERNAME in and then your Password.

    • Picture 4

  8. The printer should be shown under System Preferences/Printers & Scanners

    • Picture 7

Push/ Cloud Version using www.print.ethz.ch

Using the Push/Cloud Version without installing something, use the Website www.print.ethz.ch

Errors

Error 1: Waiting for Authentication

If you change the NETHZ Password, you wont be able to print anymore.

There are two possibility to fix this Problem:

1. Open the Keychain, search for the pia01.ethz.ch entry and change the stored Password.

2. Open the Keychain, search for the pia01.ethz.ch entry and delete it. Delete all installed pia Printers and then reinstall them!