Differences between revisions 1 and 34 (spanning 33 versions)
⇤ ← Revision 1 as of 2015-12-15 16:59:03 →
Size: 1628
Editor: adjordje
Comment:
← Revision 34 as of 2019-02-22 12:53:30 → ⇥
Size: 3775
Editor: adjordje
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
#rev 2018-10-01 adjordje
Line 5: Line 6:
== Pull Installation ==

For Apple Clients which to install the printer on their Mac Device and print direct to the printer (pull Version), please follow this Instruction:

 1. Download the right Drivers. Please choose by the Operating System Version you are using:
    [[|For Apple OSX 10.8 and newer: ETH_Printers_and_Drivers_1.0.4_EN.dmg.zip (ZIP, 77.5 MB)]]
    [[|For Apple OSX 10.7: ETH_Printers_and_Drivers_1.0.4_Lion_EN.dmg.zip (ZIP, 77.5 MB)]]

 2. Install it

 3. Open the Program '''ETH Printers'''

 4. Under '''Specific printer''' choose the building where the printer is located. Then all available printers from that building should be shown. Choose the a printer. If you can not find the printer, please press the button '''Update printers list''' and wait for the refresh to complete.

5. When you found the printer press '''Add printer'''

6. The printer should be shown under System Preferences/Printers & Scanners
Line 26: Line 9:
Please try to only use the Push /Cloud Version. It creates less Paper waste.
Line 33: Line 17:
== Push/ Cloud Version using www.print.ethz.ch ==
Line 35: Line 18:
Using the Push/Cloud Version without installing something, use the Website www.print.ethz.ch == Pull Installation ==

For Apple Clients which to install the printer on their Mac Device and print direct to the printer (pull Version), please follow this Instruction:

'''IMPORTANT''': You will need your NETHZ Credentials. If you can not remember your NETHZ Password, try to log on https://password.ethz.ch.
If the login worked, then remember them you will need them for the Printer installation.

 1. Download the right Drivers. Please choose by the Operating System Version you are using:

    [[attachment:ETH_Printers_and_Drivers_1.0.6_EN.dmg.zip|For Apple OSX 10.8 and newer: ETH_Printers_and_Drivers_1.0.6_EN.dmg.zip]]

    [[attachment:ETH_Printers_and_Drivers_1.0.6_Lion_EN.dmg.zip|For Apple OSX 10.7 and later: ETH_Printers_and_Drivers_1.0.6_Lion_EN.dmg.zip]]

 2. Install it

 3. Open the Program '''ETH Printers'''

    {{attachment:1.png|Picture 1|width=350 height=150}}

 4. Press the button '''Update printers list''' and wait for the refresh to complete.

    You will be asked for your credentials. Use your NETHZ Account Credentials with the beginning '''d\''' Make sure to tick '''Remember this password in my keychain'''

    {{attachment:2.png|Picture 2|width=350 height=150}}

 4. Under '''Specific printer''' choose the building where the printer is located. Then all available printers from that building should be shown. Choose the a printer.
    
    {{attachment:3.png|Picture 3|width=350 height=150}}


 5. When you found the printer press '''Add printer'''


 6. You will be asked for your Credentials again. At this point only put your NETHZUSERNAME in and then your Password.

    {{attachment:5.png|Picture 4|width=350 height=150}}


 7. The printer should be shown under System Preferences/Printers & Scanners

    {{attachment:7.png|Picture 7|width=350 height=150}}

== Errors ==

=== Error 1: Waiting for Authentication ===
Line 37: Line 64:
If you change the NETHZ Password, you wont be able to print anymore.

There are two possibility to fix this Problem:

1. Open the Keychain, search for the '''pia01.ethz.ch''' entry and change the stored Password.

2. Open the Keychain, search for the '''pia01.ethz.ch''' entry and '''delete''' it. Delete all installed pia Printers.

3. Download the latest [[attachment:ETH_Printers_and_Drivers_1.0.6_EN.dmg.zip|For Apple OSX 10.8 and newer: ETH_Printers_and_Drivers_1.0.6_EN.dmg.zip]] and Install the Printer as mentioned above.


=== Error 2: It is just printing Black and White ===

If you printouts are getting printed only in Black and White, then your standard settings have been changed.


 * Open a File you want to print.

 * Then press '''Command + P''' the printing menu opens.
Line 38: Line 84:
 * Choose as shown on the picture under Presets and then '''Show Presets'''

{{attachment:1.1png|Picture 1|width=350 height=150}}


 * Then you will the menu as shown on the picture.

{{attachment:2.1png|Picture 1|width=500 height=300}}


 * Then change the settings to color. Make sure to tick '''Reset Presets Menu to "Default Settings" After Prinitng'''

Your prints out should be printed now in color again.

Contents

  1. Apple Clients
    1. Push/ Cloud Version
    2. Pull Installation
    3. Errors
      1. Error 1: Waiting for Authentication
      2. Error 2: It is just printing Black and White

Apple Clients

Push/ Cloud Version

This Instruction describes to print your Document at any Nashuatec Printer located at the ETH (doesn't matter which Building.) Please try to only use the Push /Cloud Version. It creates less Paper waste.

  1. If you select "Follow me", you can specify the queue. Choose "card-ethz" Queue.
  2. Click "Add printer" and wait until the installation has finished.
  3. You will now have a printer for the cloud printing system. You can go to any PIA printer and release your print job(s) using your ETH ID card.

Pull Installation

For Apple Clients which to install the printer on their Mac Device and print direct to the printer (pull Version), please follow this Instruction:

IMPORTANT: You will need your NETHZ Credentials. If you can not remember your NETHZ Password, try to log on https://password.ethz.ch. If the login worked, then remember them you will need them for the Printer installation.

  1. Download the right Drivers. Please choose by the Operating System Version you are using:
  2. Install it

  3. Open the Program ETH Printers

    • Picture 1

  4. Press the button Update printers list and wait for the refresh to complete.

    • You will be asked for your credentials. Use your NETHZ Account Credentials with the beginning d\ Make sure to tick Remember this password in my keychain

      Picture 2

  5. Under Specific printer choose the building where the printer is located. Then all available printers from that building should be shown. Choose the a printer.

    • Picture 3

  6. When you found the printer press Add printer

  7. You will be asked for your Credentials again. At this point only put your NETHZUSERNAME in and then your Password.

    • Picture 4

  8. The printer should be shown under System Preferences/Printers & Scanners

    • Picture 7

Errors

Error 1: Waiting for Authentication

If you change the NETHZ Password, you wont be able to print anymore.

There are two possibility to fix this Problem:

1. Open the Keychain, search for the pia01.ethz.ch entry and change the stored Password.

2. Open the Keychain, search for the pia01.ethz.ch entry and delete it. Delete all installed pia Printers.

3. Download the latest For Apple OSX 10.8 and newer: ETH_Printers_and_Drivers_1.0.6_EN.dmg.zip and Install the Printer as mentioned above.

Error 2: It is just printing Black and White

If you printouts are getting printed only in Black and White, then your standard settings have been changed.

  • Open a File you want to print.

  • Then press Command + P the printing menu opens.

  • Choose as shown on the picture under Presets and then Show Presets

Picture 1

  • Then you will the menu as shown on the picture.

Picture 1

  • Then change the settings to color. Make sure to tick Reset Presets Menu to "Default Settings" After Prinitng

Your prints out should be printed now in color again.

Printing/ETHPrintersApple (last edited 2024-12-11 10:04:46 by adjordje)