#rev 2020-09-09 adjordje
#rev 2018-10-01 adjordje
<<TableOfContents>>

= Apple Clients =


==  ==

To install OSX Drivers please visit following Website: https://unlimited.ethz.ch/pages/viewpage.action?pageId=36244544

 1. Under '''ETH Printers (all printers)''', you will see the download link ETH Printers.pkg. Download it by click it.

 2. Install the Software.

 3. You will find the Software by searching for '''ETH Printers'''


{{attachment:downloadlink.PNG|downloadlink|width=470 height=891}}

=== Push/ Cloud Version ===

This Instruction describes to print your Document at any Nashuatec Printer located at the ETH (doesn't matter which Building.)
Please try to only use the Push /Cloud Version. It creates less Paper waste.

 1. Open the '''ETH Printers''' Tool
    
 2. Choose '''card-ethz''' or if you are a Student the '''card-stud''' Queue. In Case you have a HP Printer, then install the '''card-eth'''.

    {{attachment:tool2.PNG|Tool_2|width=771.5 height=270}}
    
 3. You will now have a printer for the cloud printing system. You can go to any PIA printer and release your print job(s) using your ETH ID card.



=== Pull Installation ===

For Apple Clients which to install the printer on their Mac Device and print direct to the printer (pull Version), please follow this Instruction:

'''IMPORTANT''': You will need your NETHZ Credentials. If you can not remember your NETHZ Password, try to log on https://password.ethz.ch.
If the login worked, then remember them you will need them for the Printer installation.

 1. Open the '''ETH Printers''' Tool.


 2. Choose the Printer you want to install


    {{attachment:tool1.PNG|Tool_1|width=771.5 height=270}}

 

== Errors ==

=== Error 1: "Waiting for Authentication" or "Authentication Error" ===
 
If you change the NETHZ Password, you wont be able to print anymore.
The old password is stored in the keychain.
 1. Open the application `Keychain.app`
 2. Search the entry containing the name of the printer queue which showed the error, i.e. `p-etz-h-60`
 3. Change the password directly in the keychain entry

=== Error 2: It is just printing Black and White ===

If you printouts are getting printed only in Black and White, then your standard settings have been changed.


 * Open a File you want to print.

 * Then press '''Command + P''' the printing menu opens.

 * Then you will the menu as shown on the picture.
   Under '''Presets''', choose '''Save Current Settings as Preset...'''

{{attachment:3.1.png|Picture 1|width=500 height=300}}


 * Then choose as shown on the picture '''Printer Features'''

{{attachment:1.1.png|Picture 1|width=500 height=300}}


 * Then change under '''Color Mode''' the settings to '''color'''. 

{{attachment:2.1.png|Picture 1|width=500 height=300}}



Your prints out should be printed now in color again.